Taul Equipment

Information

2024 GSI Grain Systems Kleen-Drag Chain Conveyors 20”

Dodge® pillow block bearings standard on all sizes, supplied with full-coverage safety guarding

½” thick slotted edge machined UHMW shaft seals on all sizes keep dust in & weather out

7 gage side panels (4.55mm) standard on all sizes

Flame-cut, hardened steel sprockets. Split hubs standard on Select IS, and available on Select

Head shafts are turned ground and polished

Companion mating flanges and discharge transitions available for all sizes

Standard 10 gauge (3.41mm) intermediate trough sides

Abrasion resistant steel wear liners with recessed fasteners for removal or replacement

Fixture assembled for squareness to ensure accurate alignment and ease of installation

Welded 2” structural steel angle flanges to provide rigidity and accurate alignment

AR steel slide rail or UHMW roller return available on all sizes

3 standard cover styles to meet any need & ensure weather-tight operation

Bolted removable bottom construction

Steel Bushed Roller (SBR) & Welded Mill (WM) chains available to suit any application

Multiple chain specs available in most box sizes to better suit conveyors of all lengths

UHMW flight pads prevent steel-to-steel contact with Nylon for extremely abrasive materials

Dodge® pillow block bearings standard on all sizes, supplied with full-coverage safety guarding

Corrosion-resistant ACME threaded chain take-up system with machined UHMW shaft seals

7 gage side panels (4.55mm) standard on all sizes

Flame-cut, hardened steel sprockets. Split hubs standard on Select IS, and available on Select

Tail shafts are turned ground and polished

Flush style design standard for both intermediate & head gates to minimize cross-contamination

Chain carry over bars are laser cut into 3/8" abrasion resistant plate bottom for superior alignment

Beveled edges ensure smooth operation

Available in inline or crosscut styles

Features may include:

• Limitless custom configurations with the right sizes, layouts, capacities, options and accessories – it’s your choice and it’s almost all standard.

• Commercial-grade options such as wear liners and bearings.

• We’ve taken the best design elements and combined them into one platform. Superior craftsmanship, commercial-grade dependability and easy maintenance that for decades of reliable and profitable service.

• Designed for your application, with greater flexibility and a wider selection of features and options.

• GSI Select IS comes standard with split sprocket for easier service, higher-end roller bearings and class II drives with class III upgrades. Hot dip galvanize or stainless steel finish, our most durable AR500 liner and S-Path alignment are all exclusive options.