2020 GSI Grain Systems Intersystems Kleen-Drag Conveyors 14 1714

Information

2020 GSI Grain Systems Intersystems Kleen-Drag Conveyors 14 1714

InterSystems responded to the specific needs of the feed industry with the development of the patented Kleen-Drag Conveyor. The self-cleaning bottom and complete enclosure mean cleanout is easier and your plant operation remains sanitary.

Features may include:

CONTOURED TAIL DESIGN
  • The contoured tail design resists accumulation of material.
CLEAN OPERATION
  • The Kleen-Drag Conveyor eliminates cross-contamination that can occur during receiving, manufacturing and packaging. For further prevention of co-mingling between production cycles, disinfectant can be run through the Kleen-Drag. The chance of pockets of material accumulating in the gates is all but eliminated through the flush-mount design. Additionally, the Kleen-Drag is specifically engineered to utilize slower chain speeds, promoting easy handling of sensitive products.
SERVICEABILITY
  • Kleen-Drag Conveyors were designed to be easy to service and maintain. With fasteners positioned clear of material flow, the A.R. steel liners can be quickly replaced without parting or removing the chain.

Photos

Highlights

  • Cecilia, Kentucky
  • 2020
  • GSI Grain Systems
  • Intersystems Kleen-Drag Conveyors 14 1714
  • Available
  • Section (including side flanges): 20
  • Head (W/LID): 18 1/16 | Section (including BTM flange): 18 1/16 | Standard inlet: 4 | Gate: 6

Specifications

  • 2020
  • GSI Grain Systems
  • Intersystems Kleen-Drag Conveyors 14
  • 1714
  • General
  • 0-7 DEG.: 95 feet/min (0.48 meters/sec) / 110 feet/min (0.56 meters/sec) / 130 feet/min (0.66 meters/sec) / 160 feet/min (0.82 meters/sec) / 200 feet/min (1.02 meters/sec)
  • Gate extension (crosscut): 27 1/4 | Maximum head bearings (vertical): 2 15/16
  • Head (W/LID): 18 1/16 | Section (including BTM flange): 18 1/16 | Standard inlet: 4 | Gate: 6
  • Head (body): 36 | Head (takeup): 43 | Section: 116 | Tail: 22 | Standard inlet: 18 | Gate discharge: 36
  • Section (including side flanges): 20
  • 5132 cubic feet per hour to 10811 cubic feet per hour